Wood fibre EWI · County Durham
Wood fibre insulation for older homes in Stockton-on-Tees
Looking for wood fibre external wall insulation in Stockton-on-Tees? We survey homes across Stockton-on-Tees and the TS19 area, then give you a fixed written price before any work starts. If your home in Stockton-on-Tees is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Free survey in TS19 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Stockton-on-Tees
Postcode, service and a phone number is all we need.
What the job covers
- Thicker than foam for the same U-value
- Made from a renewable material with low embodied carbon
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- High density gives good protection from summer heat
Before we quote in Stockton-on-Tees
We cover Stockton-on-Tees and nearby Billingham, Thornaby-on-Tees and Middlesbrough. Stockton-on-Tees sits around 10 miles from Darlington. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across County Durham: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For older stone and early brick properties in Stockton-on-Tees, we look at a wood fibre and lime build-up first.
- Postcode district
- TS19
- County or area
- County Durham
- Nation
- England
- Nearby
- Billingham, Thornaby-on-Tees, Middlesbrough, Hartlepool
England: planning and regulations
Before quoting in Stockton-on-Tees, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What finish goes over wood fibre?
A lime-based or mineral render designed for the system, applied over a reinforcing base coat. Lime finishes give the softer, slightly irregular texture that suits cottages and older terraces.
Wood fibre insulation for older homes prices in Stockton-on-Tees
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
What happens next
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Wood fibre EWI in Stockton-on-Tees: questions
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Do you cover Stockton-on-Tees?
Yes — we survey and quote wood fibre external wall insulation in Stockton-on-Tees (TS19) and nearby Billingham, Thornaby-on-Tees and Middlesbrough, with a fixed written price before any work starts.