Wood fibre EWI · Derbyshire
Wood fibre insulation for older homes in Alfreton
If you're planning wood fibre external wall insulation in Alfreton, start with a free survey: we measure, check the walls and confirm planning and building control for your address. For period homes in Alfreton, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.
- Free survey in DE55 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Alfreton
Postcode, service and a phone number is all we need.
Part of every quote
- Made from a renewable material with low embodied carbon
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Thicker than foam for the same U-value
- Often the most suitable EWI where planning allows on older properties
What we look for in Alfreton
We cover Alfreton and nearby Ripley, Sutton-in-Ashfield and Kirkby-in-Ashfield. It's roughly 13 miles from Alfreton to Derby, the largest town in Derbyshire. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.
Exposure to wind-driven rain varies across Derbyshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For older stone and early brick properties in Alfreton, we look at a wood fibre and lime build-up first.
- Postcode district
- DE55
- County or area
- Derbyshire
- Nation
- England
- Nearby
- Ripley, Sutton-in-Ashfield, Kirkby-in-Ashfield, Heanor
Approvals in England
Planning in Alfreton follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What finish goes over wood fibre?
A lime-based or mineral render designed for the system, applied over a reinforcing base coat. Lime finishes give the softer, slightly irregular texture that suits cottages and older terraces.
Wood fibre insulation for older homes prices in Alfreton
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Wood fibre EWI in Alfreton: questions
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Do you cover Alfreton?
Yes — we survey and quote wood fibre external wall insulation in Alfreton (DE55) and nearby Ripley, Sutton-in-Ashfield and Kirkby-in-Ashfield, with a fixed written price before any work starts.