Wood fibre EWI · Greater London
Wood fibre insulation for older homes in Canning Town
Need wood fibre external wall insulation in Canning Town? Tell us about the property and we'll arrange a free survey and a written quote. If your home in Canning Town is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Free survey in E16 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Canning Town
Postcode, service and a phone number is all we need.
What's included
- Made from a renewable material with low embodied carbon
- High density gives good protection from summer heat
- Thicker than foam for the same U-value
- Often the most suitable EWI where planning allows on older properties
Local considerations in Canning Town
We also cover Stratford and Bow, close to Canning Town. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For older stone and early brick properties in Canning Town, we look at a wood fibre and lime build-up first.
- Postcode district
- E16
- County or area
- Greater London
- Nation
- England
- Nearby
- Stratford, Bow, Barking, Blackheath
Planning and building control in England
Planning in Canning Town follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Why do older walls need breathable insulation?
Stone and early brick walls were built with lime mortars and renders that let moisture in and out. Sealing them with impermeable materials can trap water in the wall, leading to damp and frost damage. Wood fibre keeps the build-up open to vapour, and its ability to absorb and release moisture helps the wall stay in balance.
Wood fibre insulation for older homes prices in Canning Town
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Wood fibre EWI in Canning Town: questions
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Do you cover Canning Town?
Yes — we survey and quote wood fibre external wall insulation in Canning Town (E16) and nearby Stratford, Bow and Barking, with a fixed written price before any work starts.