Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Wood fibre EWI · Herefordshire

Wood fibre insulation for older homes in Ross-on-Wye

Wood fibre insulation for older homes in Ross-on-Wye: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. For period homes in Ross-on-Wye, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.

  • Free survey in HR9 and nearby
  • Guide price from £150 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Ross-on-Wye

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Often the most suitable EWI where planning allows on older properties
  • Compatible with lime renders used on traditional buildings
  • Made from a renewable material with low embodied carbon
  • Vapour-open and hygroscopic — buffers moisture rather than trapping it
Brown wood fibre insulation boards fixed to an old stone cottage wall, with part of the wall already in lime render

Before we quote in Ross-on-Wye

Surveys in Ross-on-Wye also cover the surrounding HR9 district and towns such as Hereford and Gloucester. Ross-on-Wye is about 11 miles from Hereford. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.

Exposure to wind-driven rain varies across Herefordshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For older stone and early brick properties in Ross-on-Wye, we look at a wood fibre and lime build-up first.

Postcode district
HR9
County or area
Herefordshire
Nation
England
Nearby
Hereford, Gloucester, Malvern, Stroud

Approvals in England

Planning in Ross-on-Wye follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

What about listed buildings and conservation areas?

EWI on a listed building needs listed building consent and is often refused where the outside appearance matters. In conservation areas, rendering or cladding a house normally needs planning permission. Wood fibre and lime are more likely to be acceptable than foam and acrylic, but the council decides. We check before quoting.

Wood fibre insulation for older homes prices in Ross-on-Wye

Wood fibre insulation for older homes guide prices
ItemGuide priceNotes
Wood fibre + lime render system£150–£210 per m²0% VATExcluding scaffold
Cottage, about 90 m² of wall£15,300–£22,1000% VATIncluding scaffold
Lime render only (no insulation)£78–£132 per m²inc VATSee lime render

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Wood fibre EWI in Ross-on-Wye: questions

Is wood fibre insulation fireproof?

No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.

Does wood fibre need a lime render?

It needs the render specified by the system manufacturer, which is usually lime or mineral based.

Can wood fibre go on a stone wall?

Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.

Do you cover Ross-on-Wye?

Yes — we survey and quote wood fibre external wall insulation in Ross-on-Wye (HR9) and nearby Hereford, Gloucester and Malvern, with a fixed written price before any work starts.

Wood fibre EWI in Ross-on-Wye

Get a free survey and fixed written price for wood fibre external wall insulation in Ross-on-Wye.

Call freeGet a quote