Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Wood fibre EWI · England

Wood fibre insulation for older homes in Lancashire

Get guide prices online, then a free survey and fixed quote for wood fibre external wall insulation in Lancashire, including Burnley and Blackburn. If your home in Lancashire is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.

  • Free survey and fixed written price
  • Guide price from £150 per m² + scaffold, 0% VAT
  • Planning and building control checked for England

Free survey in Lancashire

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • High density gives good protection from summer heat
  • Often the most suitable EWI where planning allows on older properties
  • Thicker than foam for the same U-value
  • Compatible with lime renders used on traditional buildings
  • Made from a renewable material with low embodied carbon
Brown wood fibre insulation boards fixed to an old stone cottage wall, with part of the wall already in lime render

Before we quote in Lancashire

The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

For older stone and early brick properties in Lancashire, we look at a wood fibre and lime build-up first.

Nation
England
Region
North West
Towns covered
Preston, Burnley, Blackburn, Blackpool, Morecambe, Lancaster, Lytham St Annes, Skelmersdale…
Guide price
From £150 per m² + scaffold · 0% VAT

Permissions in England

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

What finish goes over wood fibre?

A lime-based or mineral render designed for the system, applied over a reinforcing base coat. Lime finishes give the softer, slightly irregular texture that suits cottages and older terraces.

Wood fibre insulation for older homes prices in Lancashire

Wood fibre insulation for older homes guide prices
ItemGuide priceNotes
Wood fibre + lime render system£150–£210 per m²0% VATExcluding scaffold
Cottage, about 90 m² of wall£15,300–£22,1000% VATIncluding scaffold
Lime render only (no insulation)£78–£132 per m²inc VATSee lime render

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Wood fibre EWI in Lancashire: questions

Does wood fibre need a lime render?

It needs the render specified by the system manufacturer, which is usually lime or mineral based.

Is wood fibre insulation fireproof?

No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.

Can wood fibre go on a stone wall?

Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.

Do you cover all of Lancashire?

Yes. We survey and quote wood fibre external wall insulation across Lancashire, including Preston, Burnley, Blackburn, Blackpool, Morecambe.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Wood fibre EWI in Lancashire

Start with a guide price, then fix it with a free survey in Lancashire.

Call freeGet a quote