Wood fibre EWI · Leicestershire
Wood fibre insulation for older homes in Hinckley
Homeowners and landlords in Hinckley can get a free survey and a fixed written quote for wood fibre external wall insulation, covering LE10 and the surrounding area. For older stone and early brick properties in Hinckley, we look at a wood fibre and lime build-up first.
- Free survey in LE10 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Hinckley
Postcode, service and a phone number is all we need.
Part of every quote
- High density gives good protection from summer heat
- Thicker than foam for the same U-value
- Often the most suitable EWI where planning allows on older properties
- Made from a renewable material with low embodied carbon
What we look for in Hinckley
Surveys in Hinckley also cover the surrounding LE10 district and towns such as Nuneaton and Bedworth. Hinckley sits around 12 miles from Leicester. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.
Much of Leicestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If your home in Hinckley is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Postcode district
- LE10
- County or area
- Leicestershire
- Nation
- England
- Nearby
- Nuneaton, Bedworth, Coventry, Wigston
Planning and building control in England
For a house in Hinckley, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What finish goes over wood fibre?
A lime-based or mineral render designed for the system, applied over a reinforcing base coat. Lime finishes give the softer, slightly irregular texture that suits cottages and older terraces.
Wood fibre insulation for older homes prices in Hinckley
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Wood fibre EWI in Hinckley: questions
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Do you cover Hinckley?
Yes — we survey and quote wood fibre external wall insulation in Hinckley (LE10) and nearby Nuneaton, Bedworth and Coventry, with a fixed written price before any work starts.