Wood fibre EWI · North Yorkshire
Wood fibre insulation for older homes in Scarborough
If you're planning wood fibre external wall insulation in Scarborough, start with a free survey: we measure, check the walls and confirm planning and building control for your address. For period homes in Scarborough, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.
- Free survey in YO11 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Scarborough
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Thicker than foam for the same U-value
- Made from a renewable material with low embodied carbon
- High density gives good protection from summer heat
Local considerations in Scarborough
Surveys in Scarborough also cover the surrounding YO11 district and towns such as Bridlington and Beverley. Scarborough sits around 35 miles from York. Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.
Exposure to wind-driven rain varies across North Yorkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For older stone and early brick properties in Scarborough, we look at a wood fibre and lime build-up first.
- Postcode district
- YO11
- County or area
- North Yorkshire
- Nation
- England
- Nearby
- Bridlington, Beverley, Redcar, York
Planning and building control in England
Planning in Scarborough follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What finish goes over wood fibre?
A lime-based or mineral render designed for the system, applied over a reinforcing base coat. Lime finishes give the softer, slightly irregular texture that suits cottages and older terraces.
Wood fibre insulation for older homes prices in Scarborough
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Wood fibre EWI in Scarborough: questions
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Do you cover Scarborough?
Yes — we survey and quote wood fibre external wall insulation in Scarborough (YO11) and nearby Bridlington, Beverley and Redcar, with a fixed written price before any work starts.