Wood fibre EWI · England
Wood fibre insulation for older homes in Nottinghamshire
Wood fibre insulation for older homes across Nottinghamshire: measured survey, clear specification and a fixed written price before any work starts. For older stone and early brick properties in Nottinghamshire, we look at a wood fibre and lime build-up first.
- Free survey and fixed written price
- Guide price from £150 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Nottinghamshire
Tell us the postcode and what you need.
Included as standard
- Thicker than foam for the same U-value
- Often the most suitable EWI where planning allows on older properties
- High density gives good protection from summer heat
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Made from a renewable material with low embodied carbon
What we look for in Nottinghamshire
Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.
Much of Nottinghamshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If your home in Nottinghamshire is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Nation
- England
- Region
- East Midlands
- Towns covered
- Nottingham, Mansfield, West Bridgford, Sutton-in-Ashfield, Newark-on-Trent, Arnold, Hucknall, Kirkby-in-Ashfield…
- Guide price
- From £150 per m² + scaffold · 0% VAT
England: planning and regulations
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
What about listed buildings and conservation areas?
EWI on a listed building needs listed building consent and is often refused where the outside appearance matters. In conservation areas, rendering or cladding a house normally needs planning permission. Wood fibre and lime are more likely to be acceptable than foam and acrylic, but the council decides. We check before quoting.
Wood fibre insulation for older homes prices in Nottinghamshire
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Wood fibre EWI in Nottinghamshire: questions
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Do you cover all of Nottinghamshire?
Yes. We survey and quote wood fibre external wall insulation across Nottinghamshire, including Nottingham, Mansfield, West Bridgford, Sutton-in-Ashfield, Newark-on-Trent.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.