Wood fibre EWI · England
Wood fibre insulation for older homes in Shropshire
Planning wood fibre external wall insulation anywhere in Shropshire? We cover towns including Telford and Shrewsbury, and check planning and building control for each address. If your home in Shropshire is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Free survey and fixed written price
- Guide price from £150 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Shropshire
Tell us the postcode and what you need.
What you get
- Made from a renewable material with low embodied carbon
- Thicker than foam for the same U-value
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- High density gives good protection from summer heat
- Often the most suitable EWI where planning allows on older properties
Shropshire: walls, weather and approvals
The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Exposure to wind-driven rain varies across Shropshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If your home in Shropshire is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Nation
- England
- Region
- West Midlands
- Towns covered
- Telford, Shrewsbury, Wellington, Oswestry, Ludlow
- Guide price
- From £150 per m² + scaffold · 0% VAT
Permissions in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
What about listed buildings and conservation areas?
EWI on a listed building needs listed building consent and is often refused where the outside appearance matters. In conservation areas, rendering or cladding a house normally needs planning permission. Wood fibre and lime are more likely to be acceptable than foam and acrylic, but the council decides. We check before quoting.
Wood fibre insulation for older homes prices in Shropshire
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Wood fibre EWI in Shropshire: questions
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Do you cover all of Shropshire?
Yes. We survey and quote wood fibre external wall insulation across Shropshire, including Telford, Shrewsbury, Wellington, Oswestry, Ludlow.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.