Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Wood fibre EWI · Staffordshire

Wood fibre insulation for older homes in Burton upon Trent

Looking for wood fibre external wall insulation in Burton upon Trent? We survey homes across Burton upon Trent and the DE14 area, then give you a fixed written price before any work starts. For older stone and early brick properties in Burton upon Trent, we look at a wood fibre and lime build-up first.

  • Free survey in DE14 and nearby
  • Guide price from £150 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Burton upon Trent

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Thicker than foam for the same U-value
  • Compatible with lime renders used on traditional buildings
  • Made from a renewable material with low embodied carbon
  • Vapour-open and hygroscopic — buffers moisture rather than trapping it
Brown wood fibre insulation boards fixed to an old stone cottage wall, with part of the wall already in lime render

What we look for in Burton upon Trent

We also cover Swadlincote and Derby, close to Burton upon Trent. It's roughly 26 miles from Burton upon Trent to Stoke-on-Trent, the largest town in Staffordshire. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.

Exposure to wind-driven rain varies across Staffordshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

If your home in Burton upon Trent is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.

Postcode district
DE14
County or area
Staffordshire
Nation
England
Nearby
Swadlincote, Derby, Lichfield, Tamworth

England: planning and regulations

For a house in Burton upon Trent, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

What about listed buildings and conservation areas?

EWI on a listed building needs listed building consent and is often refused where the outside appearance matters. In conservation areas, rendering or cladding a house normally needs planning permission. Wood fibre and lime are more likely to be acceptable than foam and acrylic, but the council decides. We check before quoting.

Wood fibre insulation for older homes prices in Burton upon Trent

Wood fibre insulation for older homes guide prices
ItemGuide priceNotes
Wood fibre + lime render system£150–£210 per m²0% VATExcluding scaffold
Cottage, about 90 m² of wall£15,300–£22,1000% VATIncluding scaffold
Lime render only (no insulation)£78–£132 per m²inc VATSee lime render

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Wood fibre EWI in Burton upon Trent: questions

Is wood fibre insulation fireproof?

No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.

Can wood fibre go on a stone wall?

Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.

Does wood fibre need a lime render?

It needs the render specified by the system manufacturer, which is usually lime or mineral based.

Do you cover Burton upon Trent?

Yes — we survey and quote wood fibre external wall insulation in Burton upon Trent (DE14) and nearby Swadlincote, Derby and Lichfield, with a fixed written price before any work starts.

Wood fibre EWI in Burton upon Trent

Get a free survey and fixed written price for wood fibre external wall insulation in Burton upon Trent.

Call freeGet a quote