Wood fibre EWI · Tyne and Wear
Wood fibre insulation for older homes in Jarrow
From Jarrow to Wallsend, we price wood fibre external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. If your home in Jarrow is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Free survey in NE32 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Jarrow
Postcode, service and a phone number is all we need.
What the job covers
- Made from a renewable material with low embodied carbon
- Often the most suitable EWI where planning allows on older properties
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Thicker than foam for the same U-value
What we look for in Jarrow
As well as Jarrow itself, we quote in Wallsend, South Shields and North Shields. Jarrow is about 5 miles from Newcastle upon Tyne. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For period homes in Jarrow, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.
- Postcode district
- NE32
- County or area
- Tyne and Wear
- Nation
- England
- Nearby
- Wallsend, South Shields, North Shields, Felling
Permissions in England
For a house in Jarrow, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
What finish goes over wood fibre?
A lime-based or mineral render designed for the system, applied over a reinforcing base coat. Lime finishes give the softer, slightly irregular texture that suits cottages and older terraces.
Wood fibre insulation for older homes prices in Jarrow
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Wood fibre EWI in Jarrow: questions
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Do you cover Jarrow?
Yes — we survey and quote wood fibre external wall insulation in Jarrow (NE32) and nearby Wallsend, South Shields and North Shields, with a fixed written price before any work starts.