Acrylic render · England
Acrylic render in Tyne and Wear
Quotes for acrylic render in Tyne and Wear set out the system, detailing, access and VAT position in writing. For Tyne and Wear homes with older solid walls, we'll usually steer you to silicone or mineral finishes instead.
- Free survey and fixed written price
- Guide price from £60 per m² + scaffold, inc VAT
- Planning and building control checked for England
Free survey in Tyne and Wear
Tell us the postcode and what you need.
What you get
- Good for extensions, boards and smaller areas
- Thin-coat, typically 1–2mm grain
- Very wide colour range, including stronger shades
- Through-coloured — no painting needed
- Less vapour-open than silicone or mineral finishes
Tyne and Wear: walls, weather and approvals
The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We show acrylic and silicone side by side at Tyne and Wear surveys so you can see the difference in texture.
- Nation
- England
- Region
- North East
- Towns covered
- Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Wallsend, Newburn, North Shields…
- Guide price
- From £60 per m² + scaffold · inc VAT
Planning and building control in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
Acrylic or silicone?
Both are thin-coat, through-coloured finishes. Acrylic is more flexible and slightly cheaper; silicone is more water-repellent and vapour-open and generally stays cleaner. On older solid walls that need to breathe, silicone or mineral finishes are usually preferred.
Acrylic render prices in Tyne and Wear
| Item | Guide price | Notes |
|---|---|---|
| Acrylic render with base coat + mesh | £60–£94 per m²inc VAT | Excluding scaffold |
| Single-storey extension | £2,275–£3,955inc VAT | Typical |
| As an EWI finish | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Acrylic render in Tyne and Wear: questions
How long does acrylic render last?
Typically 20–25 years or more with maintenance on a suitable wall.
Can acrylic render go on a solid stone wall?
It's not our first choice there, because a vapour-open finish is safer on walls that need to breathe.
Can I have a dark colour?
Yes, though very dark shades absorb more heat; the manufacturer's colour guidance is followed.
Do you cover all of Tyne and Wear?
Yes. We survey and quote acrylic render across Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.