Brick slip EWI · Greater London
Brick slip finish over insulation in Romford
If you're planning brick slip finishes in Romford, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On brick terraces in Romford, slips can insulate the wall while keeping the street's look.
- Free survey in RM1 and nearby
- Guide price from £185 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Romford
Postcode, service and a phone number is all we need.
What you get
- Thin slips (typically 10–20mm) bonded to the system base coat
- Heavier than render, so more fixings are specified
- Can be matched to local brick colours and bonds
- Helps meet 'similar appearance' planning conditions
Local considerations in Romford
As well as Romford itself, we quote in Hornchurch, Dagenham and Becontree. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Mixed finishes — brick slip below, render above — can suit semi-detached houses in Romford.
- Postcode district
- RM1
- County or area
- Greater London
- Nation
- England
- Nearby
- Hornchurch, Dagenham, Becontree, Ilford
Planning and building control in England
Before quoting in Romford, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is the brick slip system built up?
Insulation boards are fixed as for any EWI, followed by a reinforced base coat. The slips are bonded with the system adhesive, spaced for joints, then pointed. Corners use L-shaped slips so the edge looks like a solid brick.
Brick slip finish over insulation prices in Romford
| Item | Guide price | Notes |
|---|---|---|
| Brick slip EWI | £185–£260 per m²0% VAT | Excluding scaffold |
| Brick slip feature panels | £168–£265 per m²inc VAT | Plinths, bays, features |
| Matching samples | Provided at survey |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Brick slip EWI in Romford: questions
Do brick slips fall off?
Not when installed to the system manufacturer's specification, with the right adhesive, fixings and pointing.
Is a brick slip finish more expensive?
Yes — roughly £70–£120 per m² more than render, because of materials and slower installation.
Can I mix brick slips and render?
Yes. A brick plinth or ground floor with render above is a common combination.
Do you cover Romford?
Yes — we survey and quote brick slip finishes in Romford (RM1) and nearby Hornchurch, Dagenham and Becontree, with a fixed written price before any work starts.