Brick slip EWI · Lancashire
Brick slip finish over insulation in Leyland
Homeowners and landlords in Leyland can get a free survey and a fixed written quote for brick slip finishes, covering PR5 and the surrounding area. We bring brick slip samples to Leyland surveys so you can compare them with neighbouring houses.
- Free survey in PR5 and nearby
- Guide price from £185 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Leyland
Postcode, service and a phone number is all we need.
What you get
- Heavier than render, so more fixings are specified
- Thin slips (typically 10–20mm) bonded to the system base coat
- Corners formed with L-shaped slips for a convincing finish
- Clay, concrete or flexible acrylic slips available
What we look for in Leyland
Surveys in Leyland also cover the surrounding PR5 district and towns such as Chorley and Preston. It's roughly 5 miles from Leyland to Preston, the largest town in Lancashire. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Mixed finishes — brick slip below, render above — can suit semi-detached houses in Leyland.
- Postcode district
- PR5
- County or area
- Lancashire
- Nation
- England
- Nearby
- Chorley, Preston, Blackburn, Darwen
England: planning and regulations
Planning in Leyland follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is the brick slip system built up?
Insulation boards are fixed as for any EWI, followed by a reinforced base coat. The slips are bonded with the system adhesive, spaced for joints, then pointed. Corners use L-shaped slips so the edge looks like a solid brick.
Brick slip finish over insulation prices in Leyland
| Item | Guide price | Notes |
|---|---|---|
| Brick slip EWI | £185–£260 per m²0% VAT | Excluding scaffold |
| Brick slip feature panels | £168–£265 per m²inc VAT | Plinths, bays, features |
| Matching samples | Provided at survey |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Brick slip EWI in Leyland: questions
Is a brick slip finish more expensive?
Yes — roughly £70–£120 per m² more than render, because of materials and slower installation.
Can I mix brick slips and render?
Yes. A brick plinth or ground floor with render above is a common combination.
Will brick slips match my neighbours' brick?
We source slips to get close in colour and texture and show samples beforehand, but an exact match to weathered brick isn't always possible.
Do you cover Leyland?
Yes — we survey and quote brick slip finishes in Leyland (PR5) and nearby Chorley, Preston and Blackburn, with a fixed written price before any work starts.