EPS insulation · Cheshire
EPS external wall insulation in Congleton
Quotes for EPS external wall insulation in Congleton list the system, the detailing and the VAT position in writing, so you know exactly what's included. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Congleton.
- Free survey in CW12 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Congleton
Postcode, service and a phone number is all we need.
Included as standard
- Finished in silicone, acrylic, mineral render or brick slip
- Light boards mean fewer fixings and a faster install
- Used on low-rise houses; combustible, so not for taller buildings
- Grey graphite EPS reaches a given U-value with a thinner board
Homes and walls in Congleton
We cover Congleton and nearby Kidsgrove, Macclesfield and Crewe. It's roughly 22 miles from Congleton to Warrington, the largest town in Cheshire. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Cheshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Where eaves are shallow on a house in Congleton, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- CW12
- County or area
- Cheshire
- Nation
- England
- Nearby
- Kidsgrove, Macclesfield, Crewe, Stoke-on-Trent
England: planning and regulations
Before quoting in Congleton, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Congleton
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Congleton: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Do you cover Congleton?
Yes — we survey and quote EPS external wall insulation in Congleton (CW12) and nearby Kidsgrove, Macclesfield and Crewe, with a fixed written price before any work starts.