EPS insulation · Cheshire
EPS external wall insulation in Crewe
EPS external wall insulation in Crewe: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Crewe.
- Free survey in CW1 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Crewe
Postcode, service and a phone number is all we need.
Included as standard
- Easy to shape around bays, arches and reveals
- Finished in silicone, acrylic, mineral render or brick slip
- Grey graphite EPS reaches a given U-value with a thinner board
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
Crewe: walls, weather and approvals
As well as Crewe itself, we quote in Winsford, Kidsgrove and Congleton. It's roughly 21 miles from Crewe to Warrington, the largest town in Cheshire. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Cheshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Where eaves are shallow on a house in Crewe, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- CW1
- County or area
- Cheshire
- Nation
- England
- Nearby
- Winsford, Kidsgrove, Congleton, Newcastle-under-Lyme
England: planning and regulations
Planning in Crewe follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
When is EPS the right choice?
EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.
EPS external wall insulation prices in Crewe
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Crewe: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Crewe?
Yes — we survey and quote EPS external wall insulation in Crewe (CW1) and nearby Winsford, Kidsgrove and Congleton, with a fixed written price before any work starts.