EPS insulation · County Antrim
EPS external wall insulation in Belfast
Quotes for EPS external wall insulation in Belfast list the system, the detailing and the VAT position in writing, so you know exactly what's included. We compare EPS against mineral wool for each Belfast enquiry rather than assuming one board suits every wall.
- Free survey in BT1 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Belfast
Postcode, service and a phone number is all we need.
Part of every quote
- Finished in silicone, acrylic, mineral render or brick slip
- Grey graphite EPS reaches a given U-value with a thinner board
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
Belfast: walls, weather and approvals
We cover Belfast and nearby Castlereagh, Newtownabbey and Holywood. Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.
Parts of County Antrim fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Belfast.
- Postcode district
- BT1
- County or area
- County Antrim
- Nation
- Northern Ireland
- Nearby
- Castlereagh, Newtownabbey, Holywood, Lisburn
Permissions in Northern Ireland
In Northern Ireland, permitted development is set by the 2015 Order; in Belfast, changing a house's external appearance, and any work on flats or listed buildings, may need permission, so we check with the council.
External wall insulation is building work under the Building Regulations (Northern Ireland) 2012, so council building control is involved, with Technical Booklet F1 covering dwellings.
What is EPS insulation?
Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.
EPS external wall insulation prices in Belfast
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Belfast: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Belfast?
Yes — we survey and quote EPS external wall insulation in Belfast (BT1) and nearby Castlereagh, Newtownabbey and Holywood, with a fixed written price before any work starts.