Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · County Durham

EPS external wall insulation in Chester-le-Street

Quotes for EPS external wall insulation in Chester-le-Street list the system, the detailing and the VAT position in writing, so you know exactly what's included. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Chester-le-Street.

  • Free survey in DH3 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Chester-le-Street

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Easy to shape around bays, arches and reveals
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

What we look for in Chester-le-Street

We also cover Washington and Houghton-le-Spring, close to Chester-le-Street. It's roughly 23 miles from Chester-le-Street to Darlington, the largest town in County Durham. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.

Exposure to wind-driven rain varies across County Durham: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where eaves are shallow on a house in Chester-le-Street, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
DH3
County or area
County Durham
Nation
England
Nearby
Washington, Houghton-le-Spring, Stanley, Durham

Permissions in England

Planning in Chester-le-Street follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Chester-le-Street

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in Chester-le-Street: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Chester-le-Street?

Yes — we survey and quote EPS external wall insulation in Chester-le-Street (DH3) and nearby Washington, Houghton-le-Spring and Stanley, with a fixed written price before any work starts.

EPS insulation in Chester-le-Street

Send your postcode and we'll arrange a survey in Chester-le-Street.

Call freeGet a quote