EPS insulation · Tyne and Wear
EPS external wall insulation in Washington
We quote EPS external wall insulation for homes in Washington (NE37) and nearby Chester-le-Street and Felling, with guide prices online and a free survey to fix the price. Where eaves are shallow on a house in Washington, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in NE37 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Washington
Postcode, service and a phone number is all we need.
Included as standard
- Easy to shape around bays, arches and reveals
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Used on low-rise houses; combustible, so not for taller buildings
- Finished in silicone, acrylic, mineral render or brick slip
Homes and walls in Washington
As well as Washington itself, we quote in Chester-le-Street, Felling and Houghton-le-Spring. Washington sits around 6 miles from Newcastle upon Tyne. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We compare EPS against mineral wool for each Washington enquiry rather than assuming one board suits every wall.
- Postcode district
- NE37
- County or area
- Tyne and Wear
- Nation
- England
- Nearby
- Chester-le-Street, Felling, Houghton-le-Spring, Sunderland
Permissions in England
For a house in Washington, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Washington
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Washington: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Washington?
Yes — we survey and quote EPS external wall insulation in Washington (NE37) and nearby Chester-le-Street, Felling and Houghton-le-Spring, with a fixed written price before any work starts.