Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Tyne and Wear

EPS external wall insulation in Sunderland

Quotes for EPS external wall insulation in Sunderland list the system, the detailing and the VAT position in writing, so you know exactly what's included. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Sunderland.

  • Free survey in SR1 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Sunderland

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Used on low-rise houses; combustible, so not for taller buildings
  • Easy to shape around bays, arches and reveals
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

What we look for in Sunderland

We cover Sunderland and nearby Seaham, Washington and Houghton-le-Spring. It's roughly 10 miles from Sunderland to Newcastle upon Tyne, the largest town in Tyne and Wear. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.

Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where eaves are shallow on a house in Sunderland, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
SR1
County or area
Tyne and Wear
Nation
England
Nearby
Seaham, Washington, Houghton-le-Spring, Jarrow

Permissions in England

For a house in Sunderland, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Sunderland

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in Sunderland: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Sunderland?

Yes — we survey and quote EPS external wall insulation in Sunderland (SR1) and nearby Seaham, Washington and Houghton-le-Spring, with a fixed written price before any work starts.

EPS insulation in Sunderland

Start with a guide price, then fix it with a free survey in Sunderland.

Call freeGet a quote