Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · County Durham

EPS external wall insulation in Newton Aycliffe

From Newton Aycliffe to Bishop Auckland, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Newton Aycliffe.

  • Free survey in DL5 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Newton Aycliffe

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Light boards mean fewer fixings and a faster install
  • Easy to shape around bays, arches and reveals
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Grey graphite EPS reaches a given U-value with a thinner board
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Newton Aycliffe: walls, weather and approvals

We cover Newton Aycliffe and nearby Bishop Auckland, Darlington and Stockton-on-Tees. It's roughly 7 miles from Newton Aycliffe to Darlington, the largest town in County Durham. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.

Exposure to wind-driven rain varies across County Durham: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

We compare EPS against mineral wool for each Newton Aycliffe enquiry rather than assuming one board suits every wall.

Postcode district
DL5
County or area
County Durham
Nation
England
Nearby
Bishop Auckland, Darlington, Stockton-on-Tees, Durham

Permissions in England

Planning in Newton Aycliffe follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Newton Aycliffe

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Newton Aycliffe: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Newton Aycliffe?

Yes — we survey and quote EPS external wall insulation in Newton Aycliffe (DL5) and nearby Bishop Auckland, Darlington and Stockton-on-Tees, with a fixed written price before any work starts.

EPS insulation in Newton Aycliffe

Start with a guide price, then fix it with a free survey in Newton Aycliffe.

Call freeGet a quote