Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · County Durham

EPS external wall insulation in Bishop Auckland

We quote EPS external wall insulation for homes in Bishop Auckland (DL14) and nearby Newton Aycliffe and Durham, with guide prices online and a free survey to fix the price. We compare EPS against mineral wool for each Bishop Auckland enquiry rather than assuming one board suits every wall.

  • Free survey in DL14 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Bishop Auckland

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Light boards mean fewer fixings and a faster install
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Used on low-rise houses; combustible, so not for taller buildings
  • Finished in silicone, acrylic, mineral render or brick slip
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

What we look for in Bishop Auckland

As well as Bishop Auckland itself, we quote in Newton Aycliffe, Durham and Darlington. Bishop Auckland sits around 10 miles from Darlington. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.

Exposure to wind-driven rain varies across County Durham: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where eaves are shallow on a house in Bishop Auckland, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
DL14
County or area
County Durham
Nation
England
Nearby
Newton Aycliffe, Durham, Darlington, Chester-le-Street

Planning and building control in England

For a house in Bishop Auckland, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Bishop Auckland

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Bishop Auckland: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Do you cover Bishop Auckland?

Yes — we survey and quote EPS external wall insulation in Bishop Auckland (DL14) and nearby Newton Aycliffe, Durham and Darlington, with a fixed written price before any work starts.

EPS insulation in Bishop Auckland

Get a free survey and fixed written price for EPS external wall insulation in Bishop Auckland.

Call freeGet a quote