EPS insulation · County Durham
EPS external wall insulation in Consett
If you're planning EPS external wall insulation in Consett, start with a free survey: we measure, check the walls and confirm planning and building control for your address. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Consett.
- Free survey in DH8 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Consett
Postcode, service and a phone number is all we need.
What the job covers
- Easy to shape around bays, arches and reveals
- Used on low-rise houses; combustible, so not for taller buildings
- Finished in silicone, acrylic, mineral render or brick slip
- Light boards mean fewer fixings and a faster install
Consett: walls, weather and approvals
Surveys in Consett also cover the surrounding DH8 district and towns such as Stanley and Newburn. Consett is about 25 miles from Darlington. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across County Durham: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Where eaves are shallow on a house in Consett, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- DH8
- County or area
- County Durham
- Nation
- England
- Nearby
- Stanley, Newburn, Chester-le-Street, Durham
England: planning and regulations
Planning in Consett follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Consett
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Consett: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover Consett?
Yes — we survey and quote EPS external wall insulation in Consett (DH8) and nearby Stanley, Newburn and Chester-le-Street, with a fixed written price before any work starts.