EPS insulation · Cumbria
EPS external wall insulation in Whitehaven
Homeowners and landlords in Whitehaven can get a free survey and a fixed written quote for EPS external wall insulation, covering CA28 and the surrounding area. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Whitehaven.
- Free survey in CA28 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Whitehaven
Postcode, service and a phone number is all we need.
What the job covers
- Used on low-rise houses; combustible, so not for taller buildings
- Light boards mean fewer fixings and a faster install
- Finished in silicone, acrylic, mineral render or brick slip
- Easy to shape around bays, arches and reveals
Homes and walls in Whitehaven
We also cover Workington and Barrow-in-Furness, close to Whitehaven. It's roughly 35 miles from Whitehaven to Carlisle, the largest town in Cumbria. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Parts of Cumbria fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
We compare EPS against mineral wool for each Whitehaven enquiry rather than assuming one board suits every wall.
- Postcode district
- CA28
- County or area
- Cumbria
- Nation
- England
- Nearby
- Workington, Barrow-in-Furness, Penrith, Carlisle
Approvals in England
Before quoting in Whitehaven, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Whitehaven
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Whitehaven: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Whitehaven?
Yes — we survey and quote EPS external wall insulation in Whitehaven (CA28) and nearby Workington, Barrow-in-Furness and Penrith, with a fixed written price before any work starts.