Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Lancashire

EPS external wall insulation in Morecambe

We quote EPS external wall insulation for homes in Morecambe (LA4) and nearby Lancaster and Fleetwood, with guide prices online and a free survey to fix the price. Where eaves are shallow on a house in Morecambe, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in LA4 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Morecambe

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Easy to shape around bays, arches and reveals
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Finished in silicone, acrylic, mineral render or brick slip
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Morecambe

Surveys in Morecambe also cover the surrounding LA4 district and towns such as Lancaster and Fleetwood. Morecambe is about 22 miles from Preston. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

We compare EPS against mineral wool for each Morecambe enquiry rather than assuming one board suits every wall.

Postcode district
LA4
County or area
Lancashire
Nation
England
Nearby
Lancaster, Fleetwood, Thornton-Cleveleys, Barrow-in-Furness

England: planning and regulations

Planning in Morecambe follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Morecambe

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Morecambe: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover Morecambe?

Yes — we survey and quote EPS external wall insulation in Morecambe (LA4) and nearby Lancaster, Fleetwood and Thornton-Cleveleys, with a fixed written price before any work starts.

EPS insulation in Morecambe

Get a free survey and fixed written price for EPS external wall insulation in Morecambe.

Call freeGet a quote