Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Lancashire

EPS external wall insulation in Fleetwood

We quote EPS external wall insulation for homes in Fleetwood (FY7) and nearby Thornton-Cleveleys and Blackpool, with guide prices online and a free survey to fix the price. We compare EPS against mineral wool for each Fleetwood enquiry rather than assuming one board suits every wall.

  • Free survey in FY7 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Fleetwood

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Light boards mean fewer fixings and a faster install
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Easy to shape around bays, arches and reveals
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Fleetwood

Surveys in Fleetwood also cover the surrounding FY7 district and towns such as Thornton-Cleveleys and Blackpool. Fleetwood sits around 17 miles from Preston. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Fleetwood.

Postcode district
FY7
County or area
Lancashire
Nation
England
Nearby
Thornton-Cleveleys, Blackpool, Morecambe, Lancaster

Permissions in England

Before quoting in Fleetwood, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Fleetwood

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Fleetwood: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Fleetwood?

Yes — we survey and quote EPS external wall insulation in Fleetwood (FY7) and nearby Thornton-Cleveleys, Blackpool and Morecambe, with a fixed written price before any work starts.

EPS insulation in Fleetwood

Send your postcode and we'll arrange a survey in Fleetwood.

Call freeGet a quote