Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Devon

EPS external wall insulation in Paignton

Homeowners and landlords in Paignton can get a free survey and a fixed written quote for EPS external wall insulation, covering TQ3 and the surrounding area. We compare EPS against mineral wool for each Paignton enquiry rather than assuming one board suits every wall.

  • Free survey in TQ3 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Paignton

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Used on low-rise houses; combustible, so not for taller buildings
  • Finished in silicone, acrylic, mineral render or brick slip
  • Grey graphite EPS reaches a given U-value with a thinner board
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Paignton

As well as Paignton itself, we quote in Torquay, Newton Abbot and Exmouth. Paignton is about 26 miles from Plymouth. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Parts of Devon fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Paignton.

Postcode district
TQ3
County or area
Devon
Nation
England
Nearby
Torquay, Newton Abbot, Exmouth, Exeter

Approvals in England

Planning in Paignton follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Paignton

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Paignton: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover Paignton?

Yes — we survey and quote EPS external wall insulation in Paignton (TQ3) and nearby Torquay, Newton Abbot and Exmouth, with a fixed written price before any work starts.

EPS insulation in Paignton

Book a free survey in Paignton — no obligation.

Call freeGet a quote