EPS insulation · Devon
EPS external wall insulation in Plymstock
Quotes for EPS external wall insulation in Plymstock list the system, the detailing and the VAT position in writing, so you know exactly what's included. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Plymstock.
- Free survey in PL9 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Plymstock
Postcode, service and a phone number is all we need.
Part of every quote
- Grey graphite EPS reaches a given U-value with a thinner board
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
Local considerations in Plymstock
We also cover Plymouth and Paignton, close to Plymstock. Plymstock is about 2 miles from Plymouth. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Parts of Devon fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
We compare EPS against mineral wool for each Plymstock enquiry rather than assuming one board suits every wall.
- Postcode district
- PL9
- County or area
- Devon
- Nation
- England
- Nearby
- Plymouth, Paignton, Newton Abbot, Torquay
Planning and building control in England
Before quoting in Plymstock, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Plymstock
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Plymstock: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover Plymstock?
Yes — we survey and quote EPS external wall insulation in Plymstock (PL9) and nearby Plymouth, Paignton and Newton Abbot, with a fixed written price before any work starts.