EPS insulation · Dumfries and Galloway
EPS external wall insulation in Dumfries
If you're planning EPS external wall insulation in Dumfries, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Where eaves are shallow on a house in Dumfries, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in DG1
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Dumfries
Postcode, service and a phone number is all we need.
What you get
- Grey graphite EPS reaches a given U-value with a thinner board
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
- Light boards mean fewer fixings and a faster install
What we look for in Dumfries
We cover Dumfries and the wider Dumfries and Galloway; island and remote addresses are surveyed by arrangement. South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Dumfries and Galloway fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
We compare EPS against mineral wool for each Dumfries enquiry rather than assuming one board suits every wall.
- Postcode district
- DG1
- County or area
- Dumfries and Galloway
- Nation
- Scotland
Permissions in Scotland
For Dumfries properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Over-cladding work in Scotland often needs a building warrant from the council's building standards service, with Section 6 of the Technical Handbooks setting insulation benchmarks.
What is EPS insulation?
Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.
EPS external wall insulation prices in Dumfries
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Dumfries: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Dumfries?
Yes — we survey and quote EPS external wall insulation in Dumfries (DG1); island and remote addresses are surveyed by arrangement, with a fixed written price before any work starts.