Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Gloucestershire

EPS external wall insulation in Yate

Homeowners and landlords in Yate can get a free survey and a fixed written quote for EPS external wall insulation, covering BS37 and the surrounding area. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Yate.

  • Free survey in BS37 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Yate

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Finished in silicone, acrylic, mineral render or brick slip
  • Used on low-rise houses; combustible, so not for taller buildings
  • Easy to shape around bays, arches and reveals
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Yate

As well as Yate itself, we quote in Chipping Sodbury, Mangotsfield and Kingswood. It's roughly 24 miles from Yate to Gloucester, the largest town in Gloucestershire. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Exposure to wind-driven rain varies across Gloucestershire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

We compare EPS against mineral wool for each Yate enquiry rather than assuming one board suits every wall.

Postcode district
BS37
County or area
Gloucestershire
Nation
England
Nearby
Chipping Sodbury, Mangotsfield, Kingswood, Bath

Approvals in England

For a house in Yate, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

When is EPS the right choice?

EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.

EPS external wall insulation prices in Yate

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Yate: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Do you cover Yate?

Yes — we survey and quote EPS external wall insulation in Yate (BS37) and nearby Chipping Sodbury, Mangotsfield and Kingswood, with a fixed written price before any work starts.

EPS insulation in Yate

Book a free survey in Yate — no obligation.

Call freeGet a quote