Wood fibre EWI · Gloucestershire
Wood fibre insulation for older homes in Yate
Homeowners and landlords in Yate can get a free survey and a fixed written quote for wood fibre external wall insulation, covering BS37 and the surrounding area. For period homes in Yate, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.
- Free survey in BS37 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Yate
Postcode, service and a phone number is all we need.
What the job covers
- High density gives good protection from summer heat
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Often the most suitable EWI where planning allows on older properties
- Thicker than foam for the same U-value
What we look for in Yate
We also cover Chipping Sodbury and Mangotsfield, close to Yate. Yate sits around 24 miles from Gloucester. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Gloucestershire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For older stone and early brick properties in Yate, we look at a wood fibre and lime build-up first.
- Postcode district
- BS37
- County or area
- Gloucestershire
- Nation
- England
- Nearby
- Chipping Sodbury, Mangotsfield, Kingswood, Bath
Approvals in England
Planning in Yate follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What about listed buildings and conservation areas?
EWI on a listed building needs listed building consent and is often refused where the outside appearance matters. In conservation areas, rendering or cladding a house normally needs planning permission. Wood fibre and lime are more likely to be acceptable than foam and acrylic, but the council decides. We check before quoting.
Wood fibre insulation for older homes prices in Yate
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Wood fibre EWI in Yate: questions
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Do you cover Yate?
Yes — we survey and quote wood fibre external wall insulation in Yate (BS37) and nearby Chipping Sodbury, Mangotsfield and Kingswood, with a fixed written price before any work starts.