Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Greater London

EPS external wall insulation in Streatham

Quotes for EPS external wall insulation in Streatham list the system, the detailing and the VAT position in writing, so you know exactly what's included. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Streatham.

  • Free survey in SW16 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Streatham

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Used on low-rise houses; combustible, so not for taller buildings
  • Easy to shape around bays, arches and reveals
  • Finished in silicone, acrylic, mineral render or brick slip
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Streatham: walls, weather and approvals

As well as Streatham itself, we quote in Mitcham, Brixton and Wimbledon. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.

Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Where eaves are shallow on a house in Streatham, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
SW16
County or area
Greater London
Nation
England
Nearby
Mitcham, Brixton, Wimbledon, Battersea

Approvals in England

For a house in Streatham, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Streatham

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Streatham: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover Streatham?

Yes — we survey and quote EPS external wall insulation in Streatham (SW16) and nearby Mitcham, Brixton and Wimbledon, with a fixed written price before any work starts.

EPS insulation in Streatham

Book a free survey in Streatham — no obligation.

Call freeGet a quote