EPS insulation · Greater London
EPS external wall insulation in Wimbledon
We quote EPS external wall insulation for homes in Wimbledon (SW19) and nearby Morden and Mitcham, with guide prices online and a free survey to fix the price. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Wimbledon.
- Free survey in SW19 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Wimbledon
Postcode, service and a phone number is all we need.
Part of every quote
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
- Grey graphite EPS reaches a given U-value with a thinner board
Before we quote in Wimbledon
As well as Wimbledon itself, we quote in Morden, Mitcham and Putney. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Where eaves are shallow on a house in Wimbledon, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- SW19
- County or area
- Greater London
- Nation
- England
- Nearby
- Morden, Mitcham, Putney, New Malden
Approvals in England
Before quoting in Wimbledon, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Wimbledon
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Wimbledon: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover Wimbledon?
Yes — we survey and quote EPS external wall insulation in Wimbledon (SW19) and nearby Morden, Mitcham and Putney, with a fixed written price before any work starts.