EPS insulation · Highland
EPS external wall insulation in Inverness
Homeowners and landlords in Inverness can get a free survey and a fixed written quote for EPS external wall insulation, covering IV2 and the surrounding area. Where eaves are shallow on a house in Inverness, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in IV2 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Inverness
Postcode, service and a phone number is all we need.
What you get
- Light boards mean fewer fixings and a faster install
- Grey graphite EPS reaches a given U-value with a thinner board
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Easy to shape around bays, arches and reveals
Local considerations in Inverness
We cover Inverness and nearby Nairn, Forres and Elgin. The Highlands and Islands have many exposed stone and harled homes, timber-framed houses and scattered rural properties.
Parts of Highland fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Inverness.
- Postcode district
- IV2
- County or area
- Highland
- Nation
- Scotland
- Nearby
- Nairn, Forres, Elgin, Lossiemouth
Permissions in Scotland
For Inverness properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Where a building warrant is needed for Inverness work, it's obtained before installation starts, and the quote says who arranges it.
When is EPS the right choice?
EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.
EPS external wall insulation prices in Inverness
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Inverness: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Inverness?
Yes — we survey and quote EPS external wall insulation in Inverness (IV2) and nearby Nairn, Forres and Elgin, with a fixed written price before any work starts.