EPS insulation · Moray
EPS external wall insulation in Forres
EPS external wall insulation in Forres: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Forres.
- Free survey in IV36 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Forres
Postcode, service and a phone number is all we need.
What you get
- Easy to shape around bays, arches and reveals
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Used on low-rise houses; combustible, so not for taller buildings
- Light boards mean fewer fixings and a faster install
Forres: walls, weather and approvals
Surveys in Forres also cover the surrounding IV36 district and towns such as Nairn and Elgin. Forres is about 11 miles from Elgin. North East Scotland has granite and stone-built homes, harled cottages and post-war estates, with exposed coastal settings along much of it.
Exposure to wind-driven rain varies across Moray: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We compare EPS against mineral wool for each Forres enquiry rather than assuming one board suits every wall.
- Postcode district
- IV36
- County or area
- Moray
- Nation
- Scotland
- Nearby
- Nairn, Elgin, Lossiemouth, Buckie
Approvals in Scotland
In Scotland, permitted development for external wall changes is narrower, so in Forres we check with the council's planning team where the appearance changes, and always for flats, tenements and conservation areas.
Over-cladding work in Scotland often needs a building warrant from the council's building standards service, with Section 6 of the Technical Handbooks setting insulation benchmarks.
What is EPS insulation?
Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.
EPS external wall insulation prices in Forres
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Forres: questions
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Do you cover Forres?
Yes — we survey and quote EPS external wall insulation in Forres (IV36) and nearby Nairn, Elgin and Lossiemouth, with a fixed written price before any work starts.