Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Lancashire

EPS external wall insulation in Colne

EPS external wall insulation in Colne: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. Where eaves are shallow on a house in Colne, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in BB8 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Colne

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Light boards mean fewer fixings and a faster install
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Finished in silicone, acrylic, mineral render or brick slip
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Colne

We cover Colne and nearby Nelson, Burnley and Accrington. Colne sits around 23 miles from Preston. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

We compare EPS against mineral wool for each Colne enquiry rather than assuming one board suits every wall.

Postcode district
BB8
County or area
Lancashire
Nation
England
Nearby
Nelson, Burnley, Accrington, Keighley

Permissions in England

For a house in Colne, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Colne

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in Colne: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Colne?

Yes — we survey and quote EPS external wall insulation in Colne (BB8) and nearby Nelson, Burnley and Accrington, with a fixed written price before any work starts.

EPS insulation in Colne

Get a free survey and fixed written price for EPS external wall insulation in Colne.

Call freeGet a quote