Cover pebble dash · Lancashire
Covering pebble dash in Colne
Looking for pebble dash covering in Colne? We survey homes across Colne and the BB8 area, then give you a fixed written price before any work starts. If your house in Colne is pebble-dashed, covering the dash is usually simpler than removing it.
- Free survey in BB8 and nearby
- Guide price from £72 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Colne
Postcode, service and a phone number is all we need.
What you get
- Removing dash entirely is noisy and can damage soft brick
- Loose areas are cut out and patched first
- Sound dash can be insulated over with extra mechanical fixings
- Tap-testing finds hollow, loose areas before anything is decided

What we look for in Colne
We cover Colne and nearby Nelson, Burnley and Accrington. Colne sits around 23 miles from Preston. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Before quoting Colne pebble dash jobs, we tap-test each elevation and mark any hollow areas.
- Postcode district
- BB8
- County or area
- Lancashire
- Nation
- England
- Nearby
- Nelson, Burnley, Accrington, Keighley
England: planning and regulations
Before quoting in Colne, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
Can you render over pebble dash?
Yes, if it's well bonded. The surface is cleaned, any loose patches removed and repaired, then a levelling base coat with mesh goes over the stones before the finish. This is cheaper and less disruptive than removing the dash.
Covering pebble dash prices in Colne
| Item | Guide price | Notes |
|---|---|---|
| Render over sound pebble dash | £72–£114 per m²inc VAT | Excluding scaffold |
| Insulate over pebble dash (EWI) | £110–£175 per m²0% VAT | |
| Pebble dash removal | £24–£48 per m²inc VAT | Where needed |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Cover pebble dash in Colne: questions
Will the stones show through?
No. A levelling base coat with mesh fills over the stones before the finish goes on.
Does covering pebble dash need planning permission?
Changing the finish on a house usually doesn't in England and Wales outside conservation areas, but check if your house is in one or is listed.
Is it cheaper to cover pebble dash or remove it?
Covering is usually cheaper and less disruptive, as long as the dash is sound.
Do you cover Colne?
Yes — we survey and quote pebble dash covering in Colne (BB8) and nearby Nelson, Burnley and Accrington, with a fixed written price before any work starts.