EPS insulation · Mid Glamorgan
EPS external wall insulation in Maesteg
EPS external wall insulation in Maesteg: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Maesteg.
- Free survey in CF34 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Maesteg
Postcode, service and a phone number is all we need.
Included as standard
- Easy to shape around bays, arches and reveals
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
- Grey graphite EPS reaches a given U-value with a thinner board
What we look for in Maesteg
As well as Maesteg itself, we quote in Port Talbot, Briton Ferry and Neath. Maesteg is about 10 miles from Rhondda. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Parts of Mid Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Where eaves are shallow on a house in Maesteg, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- CF34
- County or area
- Mid Glamorgan
- Nation
- Wales
- Nearby
- Port Talbot, Briton Ferry, Neath, Bridgend
Wales: planning and regulations
We check Maesteg addresses for conservation areas and listing before quoting, because Welsh permitted development rules don't cover every external change.
In Wales, insulating or re-rendering more than half of a wall's area is treated as renovating a thermal element under Approved Document L (Wales), so building control is involved before work starts.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Maesteg
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Maesteg: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Maesteg?
Yes — we survey and quote EPS external wall insulation in Maesteg (CF34) and nearby Port Talbot, Briton Ferry and Neath, with a fixed written price before any work starts.