EPS insulation · West Glamorgan
EPS external wall insulation in Port Talbot
Need EPS external wall insulation in Port Talbot? Tell us about the property and we'll arrange a free survey and a written quote. Where eaves are shallow on a house in Port Talbot, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in SA13 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Port Talbot
Postcode, service and a phone number is all we need.
What's included
- Light boards mean fewer fixings and a faster install
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
Port Talbot: walls, weather and approvals
We cover Port Talbot and nearby Briton Ferry, Neath and Maesteg. Port Talbot is about 7 miles from Swansea. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Parts of West Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Port Talbot.
- Postcode district
- SA13
- County or area
- West Glamorgan
- Nation
- Wales
- Nearby
- Briton Ferry, Neath, Maesteg, Swansea
Approvals in Wales
For homes in Port Talbot, the local planning authority decides any borderline cases; changing a brick house to render, or work on flats, usually needs an application in Wales.
Welsh Building Regulations expect walls to be upgraded when a substantial area is renewed, and building control signs the work off.
When is EPS the right choice?
EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.
EPS external wall insulation prices in Port Talbot
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Port Talbot: questions
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Port Talbot?
Yes — we survey and quote EPS external wall insulation in Port Talbot (SA13) and nearby Briton Ferry, Neath and Maesteg, with a fixed written price before any work starts.