Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Wales

EPS external wall insulation in West Glamorgan

Quotes for EPS external wall insulation in West Glamorgan set out the system, detailing, access and VAT position in writing. Where eaves are shallow on a house in West Glamorgan, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey and fixed written price
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Planning and building control checked for Wales

Free survey in West Glamorgan

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Finished in silicone, acrylic, mineral render or brick slip
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Easy to shape around bays, arches and reveals
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Homes and walls in West Glamorgan

South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.

Parts of West Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

We compare EPS against mineral wool for each West Glamorgan enquiry rather than assuming one board suits every wall.

Nation
Wales
Region
South Wales
Towns covered
Swansea, Neath, Briton Ferry, Port Talbot, Gorseinon
Guide price
From £105 per m² + scaffold · 0% VAT

Permissions in Wales

Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. Your local planning authority has the final word.

The Building Regulations as they apply in Wales treat insulating or re-rendering more than half of a wall's area, or more than a quarter of the building's whole envelope, as renovating a thermal element, with Approved Document L (Wales) setting the target. Building control is involved before work starts.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in West Glamorgan

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in West Glamorgan: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover all of West Glamorgan?

Yes. We survey and quote EPS external wall insulation across West Glamorgan, including Swansea, Neath, Briton Ferry, Port Talbot, Gorseinon.

Do I need planning permission in Wales?

Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. We check your address before quoting.

EPS insulation in West Glamorgan

Get a free survey and fixed written price for EPS external wall insulation in West Glamorgan.

Call freeGet a quote