Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Wales

EPS external wall insulation in Powys

Quotes for EPS external wall insulation in Powys set out the system, detailing, access and VAT position in writing. Where eaves are shallow on a house in Powys, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey and fixed written price
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Planning and building control checked for Wales

Free survey in Powys

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Easy to shape around bays, arches and reveals
  • Used on low-rise houses; combustible, so not for taller buildings
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Finished in silicone, acrylic, mineral render or brick slip
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Homes and walls in Powys

Mid Wales is largely rural, with stone farmhouses, cottages and market-town terraces, many of them solid-walled.

Parts of Powys fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Powys.

Nation
Wales
Region
Mid Wales
Towns covered
Newtown, Brecon, Welshpool, Llandrindod Wells
Guide price
From £105 per m² + scaffold · 0% VAT

Wales: planning and regulations

Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. Your local planning authority has the final word.

The Building Regulations as they apply in Wales treat insulating or re-rendering more than half of a wall's area, or more than a quarter of the building's whole envelope, as renovating a thermal element, with Approved Document L (Wales) setting the target. Building control is involved before work starts.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Powys

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Powys: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover all of Powys?

Yes. We survey and quote EPS external wall insulation across Powys, including Newtown, Brecon, Welshpool, Llandrindod Wells.

Do I need planning permission in Wales?

Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. We check your address before quoting.

EPS insulation in Powys

Book a free survey in Powys — no obligation.

Call freeGet a quote