EPS insulation · Norfolk
EPS external wall insulation in Thetford
From Thetford to Bury St Edmunds, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Thetford.
- Free survey in IP24 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Thetford
Postcode, service and a phone number is all we need.
What's included
- Easy to shape around bays, arches and reveals
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Finished in silicone, acrylic, mineral render or brick slip
- Light boards mean fewer fixings and a faster install
Local considerations in Thetford
We also cover Bury St Edmunds and Newmarket, close to Thetford. It's roughly 27 miles from Thetford to Norwich, the largest town in Norfolk. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Norfolk sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Where eaves are shallow on a house in Thetford, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- IP24
- County or area
- Norfolk
- Nation
- England
- Nearby
- Bury St Edmunds, Newmarket, Stowmarket, Dereham
England: planning and regulations
Planning in Thetford follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Thetford
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Thetford: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Thetford?
Yes — we survey and quote EPS external wall insulation in Thetford (IP24) and nearby Bury St Edmunds, Newmarket and Stowmarket, with a fixed written price before any work starts.