EPS insulation · Somerset
EPS external wall insulation in Bridgwater
Need EPS external wall insulation in Bridgwater? Tell us about the property and we'll arrange a free survey and a written quote. Where eaves are shallow on a house in Bridgwater, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in TA6 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Bridgwater
Postcode, service and a phone number is all we need.
Included as standard
- Easy to shape around bays, arches and reveals
- Used on low-rise houses; combustible, so not for taller buildings
- Grey graphite EPS reaches a given U-value with a thinner board
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
Bridgwater: walls, weather and approvals
Surveys in Bridgwater also cover the surrounding TA6 district and towns such as Burnham-on-Sea and Taunton. Bridgwater is about 33 miles from Bath. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We compare EPS against mineral wool for each Bridgwater enquiry rather than assuming one board suits every wall.
- Postcode district
- TA6
- County or area
- Somerset
- Nation
- England
- Nearby
- Burnham-on-Sea, Taunton, Weston-super-Mare, Yeovil
Approvals in England
Planning in Bridgwater follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
When is EPS the right choice?
EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.
EPS external wall insulation prices in Bridgwater
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Bridgwater: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Do you cover Bridgwater?
Yes — we survey and quote EPS external wall insulation in Bridgwater (TA6) and nearby Burnham-on-Sea, Taunton and Weston-super-Mare, with a fixed written price before any work starts.