Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Somerset

EPS external wall insulation in Burnham-on-Sea

If you're planning EPS external wall insulation in Burnham-on-Sea, start with a free survey: we measure, check the walls and confirm planning and building control for your address. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Burnham-on-Sea.

  • Free survey in TA8 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Burnham-on-Sea

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Light boards mean fewer fixings and a faster install
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Finished in silicone, acrylic, mineral render or brick slip
  • Easy to shape around bays, arches and reveals
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Burnham-on-Sea

We cover Burnham-on-Sea and nearby Weston-super-Mare, Bridgwater and Clevedon. It's roughly 29 miles from Burnham-on-Sea to Bath, the largest town in Somerset. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

We compare EPS against mineral wool for each Burnham-on-Sea enquiry rather than assuming one board suits every wall.

Postcode district
TA8
County or area
Somerset
Nation
England
Nearby
Weston-super-Mare, Bridgwater, Clevedon, Taunton

England: planning and regulations

Planning in Burnham-on-Sea follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

When is EPS the right choice?

EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.

EPS external wall insulation prices in Burnham-on-Sea

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Burnham-on-Sea: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Burnham-on-Sea?

Yes — we survey and quote EPS external wall insulation in Burnham-on-Sea (TA8) and nearby Weston-super-Mare, Bridgwater and Clevedon, with a fixed written price before any work starts.

EPS insulation in Burnham-on-Sea

Get a free survey and fixed written price for EPS external wall insulation in Burnham-on-Sea.

Call freeGet a quote