Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Surrey

EPS external wall insulation in Sunbury-on-Thames

EPS external wall insulation in Sunbury-on-Thames: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. Where eaves are shallow on a house in Sunbury-on-Thames, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in TW16 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Sunbury-on-Thames

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Easy to shape around bays, arches and reveals
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Homes and walls in Sunbury-on-Thames

We also cover Walton-on-Thames and Hanworth, close to Sunbury-on-Thames. Sunbury-on-Thames is about 8 miles from Woking. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Sunbury-on-Thames.

Postcode district
TW16
County or area
Surrey
Nation
England
Nearby
Walton-on-Thames, Hanworth, Ashford (Surrey), Feltham

Planning and building control in England

Planning in Sunbury-on-Thames follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Sunbury-on-Thames

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in Sunbury-on-Thames: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Sunbury-on-Thames?

Yes — we survey and quote EPS external wall insulation in Sunbury-on-Thames (TW16) and nearby Walton-on-Thames, Hanworth and Ashford (Surrey), with a fixed written price before any work starts.

EPS insulation in Sunbury-on-Thames

Get a free survey and fixed written price for EPS external wall insulation in Sunbury-on-Thames.

Call freeGet a quote