Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Surrey

EPS external wall insulation in Walton-on-Thames

We quote EPS external wall insulation for homes in Walton-on-Thames (KT12) and nearby Sunbury-on-Thames and Esher, with guide prices online and a free survey to fix the price. We compare EPS against mineral wool for each Walton-on-Thames enquiry rather than assuming one board suits every wall.

  • Free survey in KT12 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Walton-on-Thames

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Easy to shape around bays, arches and reveals
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Homes and walls in Walton-on-Thames

We cover Walton-on-Thames and nearby Sunbury-on-Thames, Esher and Hanworth. It's roughly 8 miles from Walton-on-Thames to Woking, the largest town in Surrey. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Walton-on-Thames.

Postcode district
KT12
County or area
Surrey
Nation
England
Nearby
Sunbury-on-Thames, Esher, Hanworth, Ashford (Surrey)

Planning and building control in England

Planning in Walton-on-Thames follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Walton-on-Thames

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Walton-on-Thames: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Do you cover Walton-on-Thames?

Yes — we survey and quote EPS external wall insulation in Walton-on-Thames (KT12) and nearby Sunbury-on-Thames, Esher and Hanworth, with a fixed written price before any work starts.

EPS insulation in Walton-on-Thames

Send your postcode and we'll arrange a survey in Walton-on-Thames.

Call freeGet a quote