Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · West Sussex

EPS external wall insulation in Worthing

Looking for EPS external wall insulation in Worthing? We survey homes across Worthing and the BN11 area, then give you a fixed written price before any work starts. Where eaves are shallow on a house in Worthing, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in BN11 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Worthing

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Used on low-rise houses; combustible, so not for taller buildings
  • Easy to shape around bays, arches and reveals
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Worthing

We cover Worthing and nearby Portslade, Littlehampton and Hove. It's roughly 22 miles from Worthing to Crawley, the largest town in West Sussex. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Exposure to wind-driven rain varies across West Sussex: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Worthing.

Postcode district
BN11
County or area
West Sussex
Nation
England
Nearby
Portslade, Littlehampton, Hove, Brighton

Planning and building control in England

For a house in Worthing, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Worthing

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Worthing: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Do you cover Worthing?

Yes — we survey and quote EPS external wall insulation in Worthing (BN11) and nearby Portslade, Littlehampton and Hove, with a fixed written price before any work starts.

EPS insulation in Worthing

Start with a guide price, then fix it with a free survey in Worthing.

Call freeGet a quote