Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · West Sussex

Mineral wool external wall insulation in Worthing

From Worthing to Portslade, we price mineral wool external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. On blocks and taller buildings in Worthing, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in BN11 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Worthing

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Used on blocks of flats and buildings with storeys above 11m
  • Finished in mineral or silicone render, or brick slip
  • Vapour-open, so moisture in solid walls can dry outwards
  • Better sound reduction than foam boards
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Homes and walls in Worthing

We also cover Portslade and Littlehampton, close to Worthing. Worthing sits around 22 miles from Crawley. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Exposure to wind-driven rain varies across West Sussex: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Older solid-walled homes in Worthing can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

Postcode district
BN11
County or area
West Sussex
Nation
England
Nearby
Portslade, Littlehampton, Hove, Brighton

Approvals in England

For a house in Worthing, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Worthing

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Mineral wool EWI in Worthing: questions

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Do you cover Worthing?

Yes — we survey and quote mineral wool external wall insulation in Worthing (BN11) and nearby Portslade, Littlehampton and Hove, with a fixed written price before any work starts.

Mineral wool EWI in Worthing

Get a free survey and fixed written price for mineral wool external wall insulation in Worthing.

Call freeGet a quote