Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Flats and blocks · Shropshire

EWI for flats and blocks in Telford

Need EWI for flats and blocks in Telford? Tell us about the property and we'll arrange a free survey and a written quote. For blocks in Telford, we start with height, storeys and the planning position, because those decide the system.

  • Free survey in TF3 and nearby
  • Guide price from £110 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Telford

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Mineral wool systems where building height or guidance requires them
  • Cavity barriers and fire-stopping detailed at compartment floors
  • We work with managing agents on resident communication
  • Planning permission is needed for flats and maisonettes
A five-storey block of flats half re-clad in white and grey insulated render, with scaffolding on the brick half

Before we quote in Telford

As well as Telford itself, we quote in Wellington, Shrewsbury and Wolverhampton. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.

Exposure to wind-driven rain varies across Shropshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Freeholders and managing agents in Telford get a written specification and pricing they can share with owners.

Postcode district
TF3
County or area
Shropshire
Nation
England
Nearby
Wellington, Shrewsbury, Wolverhampton, Wednesfield

England: planning and regulations

For a house in Telford, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

What fire-safety rules apply?

For blocks with a storey 11 metres or more above ground, guidance points to external wall materials of limited combustibility, and combustible materials are banned in the external walls of relevant buildings 18 metres and over in England. Higher-risk buildings (18 metres or seven storeys and above, with at least two homes) go through the Building Safety Regulator. We specify non-combustible systems wherever these apply and tell you at enquiry stage if a building is outside our scope.

EWI for flats and blocks prices in Telford

EWI for flats and blocks guide prices
ItemGuide priceNotes
Mineral wool system on a low-rise block£110–£190 per m²0% VATPriced on survey
Scaffold and accessPriced per buildingIncludes licences where needed
Specification and pricing pack for consultationIncluded with quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Flats and blocks in Telford: questions

Can one flat have external wall insulation on its own?

Rarely. The outside walls are usually owned by the freeholder, the result would look patchy, and planning is unlikely. Whole-building schemes are the norm.

Do flats need planning permission for EWI?

Yes. Permitted development rights for external alterations apply to houses, not flats or maisonettes, so an application is needed.

Do you work on high-rise buildings?

Tell us the height and number of storeys. Buildings in the higher-risk category have a separate regulatory route, and we'll say plainly if we're not the right contractor.

Do you cover Telford?

Yes — we survey and quote EWI for flats and blocks in Telford (TF3) and nearby Wellington, Shrewsbury and Wolverhampton, with a fixed written price before any work starts.

Flats and blocks in Telford

Start with a guide price, then fix it with a free survey in Telford.

Call freeGet a quote