Wood fibre EWI · Shropshire
Wood fibre insulation for older homes in Telford
Homeowners and landlords in Telford can get a free survey and a fixed written quote for wood fibre external wall insulation, covering TF3 and the surrounding area. For older stone and early brick properties in Telford, we look at a wood fibre and lime build-up first.
- Free survey in TF3 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Telford
Postcode, service and a phone number is all we need.
What the job covers
- Made from a renewable material with low embodied carbon
- High density gives good protection from summer heat
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Compatible with lime renders used on traditional buildings
Before we quote in Telford
As well as Telford itself, we quote in Wellington, Shrewsbury and Wolverhampton. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Exposure to wind-driven rain varies across Shropshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If your home in Telford is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Postcode district
- TF3
- County or area
- Shropshire
- Nation
- England
- Nearby
- Wellington, Shrewsbury, Wolverhampton, Wednesfield
Permissions in England
Planning in Telford follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What about listed buildings and conservation areas?
EWI on a listed building needs listed building consent and is often refused where the outside appearance matters. In conservation areas, rendering or cladding a house normally needs planning permission. Wood fibre and lime are more likely to be acceptable than foam and acrylic, but the council decides. We check before quoting.
Wood fibre insulation for older homes prices in Telford
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Wood fibre EWI in Telford: questions
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Do you cover Telford?
Yes — we survey and quote wood fibre external wall insulation in Telford (TF3) and nearby Wellington, Shrewsbury and Wolverhampton, with a fixed written price before any work starts.